How to sample shrimp for disease testing
Three rules matter most: pick shrimp that suit the reason for testing, take the right tissue for the disease, and use a consistent method each time. When investigating illness, prioritise weak or sinking shrimp. For routine monitoring, keep the selection rule, tissue and sampling points consistent.
The shrimp counts below guide sample preparation. They do not prove that a pond or seed batch is free of disease. A negative result covers only the animals sampled and does not rule disease out. Follow the instructions supplied with the kit lot, and agree laboratory sampling requirements before collecting samples.
Which shrimp should I pick?
When shrimp are ill, choose weak, dying or visibly affected animals, including shrimp that are sinking or have dropped to the bottom. Selecting only healthy-looking shrimp can miss the animals most useful for investigating the problem. The World Organisation for Animal Health (WOAH) advises taking live or dying shrimp that show the signs of the illness. For AHPND, it advises dying shrimp or shrimp showing signs.12 Sinking after losing swimming ability has also been reported in post-larvae affected by TPD.3
For routine monitoring, agree a selection rule and sampling points with your adviser, then use them consistently through the crop. Record whether you selected shrimp showing signs or followed the routine rule. If illness leads you to sample weak shrimp instead, write it down, because those results cannot be compared directly with your routine samples.
Choosing weak shrimp helps investigate illness. It does not show how many shrimp in the pond are infected. Ask a laboratory to design the sampling if the purpose is certification or a declaration of disease freedom.1
Which tissue should I take for each disease?
Use the disease guide and the kit instructions together. The hepatopancreas is the shrimp's digestive organ. Swimming legs, called pleopods, are beneath the abdomen.
| Disease | Tissue | Notes |
|---|---|---|
| EHP guide | Whole post-larvae, hepatopancreas or heads depending on size | EHP infects the hepatopancreas.4 Use whole animals for post-larvae. At 500 to 1,000 shrimp/kg, the guide allows hepatopancreas or heads. For larger shrimp, use hepatopancreas. Follow the kit instructions for preparation. |
| WSSV guide | Swimming legs (pleopods) or gills | These are suitable tissues for larger shrimp.5 Follow the WSSV kit instructions. The guide uses whole animals for post-larvae. |
| AHPND guide | Hepatopancreas and stomach | These are digestive organs.2 Legs or gills taken for WSSV cannot be used for AHPND. Follow the guide and kit instructions for small shrimp and post-larvae. |
| TPD guide | Whole post-larvae | Use whole animals for hatchery batch screening and checks before stocking. Check the kit instructions for the earliest post-larval stage that can be tested. |
How many shrimp should I sample?
The table gives the minimum numbers used for on-farm kit sample preparation in the disease guides. Choose the tissue from the disease table above. The culture days are approximate reference points, so record the actual stage and size of your shrimp.
| Shrimp stage or size | Minimum number of shrimp to sample |
|---|---|
| Post-larvae, 12 days old | 25 to 30 |
| 500 to 1,000 shrimp/kg, around day 20 | 10 to 15 |
| 200 to 300 shrimp/kg, around day 50 | 7 to 10 |
| 60 to 100 shrimp/kg, around day 90 | 3 to 5 |
| 30 to 50 shrimp/kg | 2 to 3 |
Fewer shrimp are needed as they grow, because each larger shrimp gives more tissue for preparing the test. A laboratory should set the sampling plan for certification or disease-freedom testing.
Follow the kit instructions for tissue amount and preparation. Pooling means combining tissue from several shrimp into one sample. The numbers in the table are not a pool size, so do not put all the shrimp into one tube unless the kit instructions allow it. When following changes over time, test each shrimp separately unless the kit instructions say pooled samples can be used for this. For AHPND, WOAH advises testing larger shrimp one at a time, because pooling has not been fully evaluated. Small life stages can be pooled to get enough material.2
The table lists 25 to 30 shrimp for post-larvae at 12 days. Do not wait until that age if younger post-larvae are showing signs. Check the youngest stage the kit can test, and contact a laboratory if needed. See the TPD guide.
How often should I test?
Screen post-larvae before stocking. Plan further sampling at the culture stages in the table, then review testing as harvest approaches. Agree the schedule with your technical adviser, taking account of the pond's history, the diseases being investigated and what is happening during the crop.
Use the table as a set of planning points rather than a fixed calendar for every pond. Do not wait for the next scheduled test if shrimp become weak, feeding falls or mortality rises. Find out the cause and discuss extra testing, or sending samples to a laboratory, with your adviser.
How do I keep samples comparable over time?
Keep the tissue type, shrimp selection rule, sampling points and preparation method consistent. Changing tissue or switching between individual and pooled samples can change the signal you see and make comparisons harder. Record any necessary change so it is visible when reviewing the results.
Keep this record for every sampling event:
| Record | What to write down |
|---|---|
| Pond | Pond code, or tank and batch code for post-larvae |
| Date | Date of sample collection |
| Culture stage | Post-larval age or day of culture, and shrimp size |
| Tissue | Tissue taken and preparation method |
| Number of shrimp | Number sampled, and whether tested individually or pooled |
| Sampling point | Where the shrimp were collected |
| Operator | Person collecting and preparing the sample |
| Kit lot | Lot number on the kit |
| Device | Device identifier |
| Control status | Whether the controls met the kit requirements |
Keep the result with this record, alongside feeding, growth, mortality and water observations. Follow the kit's control requirements before interpreting the run. If the positive control fails, repeat the test rather than treating the sample results as valid.
For RAPID, RAPIDPlus and RAPIDMax, a stick extracts DNA at the pond, then LAMP runs on the device. Results take about an hour including sample preparation. See the science page for validation studies and Testing on the farm or at a lab for help choosing the testing route.
A positive on-farm result means the disease is suspected, and a laboratory can confirm it. Contact your adviser straight away and keep shrimp, water and equipment from that pond away from other ponds. WOAH includes a LAMP positive among its criteria for a suspect WSSV case, with further testing needed for confirmation.5 A negative covers only the animals sampled and does not rule the disease out. If shrimp keep dying or showing signs despite negative results, send samples to a laboratory.
A very weak result near the limit of detection, the smallest amount a test can detect, can be inconsistent. Retest following the kit instructions or send samples to a laboratory. Do not use a weak signal as a reliable measure of a low infection load. Following a trend with RAPIDPlus does not give an exact amount of pathogen and does not predict pond losses.
How should I send samples to a laboratory?
Ask the receiving laboratory before collecting samples. Tell it the shrimp's stage, the signs, the on-farm results and which diseases are suspected. Agree:
- Which shrimp and tissues to send, and how many.
- Whether samples should be separate or pooled.
- Which preservative to use, its concentration and the amount needed.
- How to label, package and transport the samples, including temperature and delivery time, and how to pack them so nothing can leak.
Preservation depends on the test. WOAH describes ethanol preservation for molecular testing and a fixative such as Davidson's AFA for histopathology, which examines tissue under a microscope.12 Ask for separate sample instructions if both types of testing are needed. Do not add any preservative until the laboratory tells you which one to use, how much to use and how to handle it. Preservatives are hazardous. Ethanol catches fire easily, so keep it away from flames and heat. Davidson's fixative contains formalin, so wear gloves and eye protection and work in a well-ventilated area. Never pour preservatives or preserved samples into ponds, canals or drains.
Label each container so it can be matched to the pond, date and sample record. Use clean, new sample containers and keep samples from different ponds separate to reduce cross-contamination.1 Include the sampling record and the feeding, mortality and water observations with the submission.
How do I avoid spreading contamination while sampling?
Use separate nets, buckets and sampling tools for each pond where you can. Clean and disinfect anything that has to be shared before it goes to the next pond, and sample healthy ponds before ponds with sick shrimp. Follow the disinfectant label and do not let wash water run into ponds or canals. Use clean consumables, change pipette tips between samples and keep sample preparation away from used reaction tubes. Keep samples and their labels together so that material from different ponds is not mixed.
Keep reaction tubes closed during and after the run. Opening a used tube can release copied DNA into the testing area and cause false-positive results in later runs.
Wear suitable protective equipment when handling tissue and reagents, and work in a clean, well-ventilated area. Collect biological samples, used reagents and consumables in suitable containers, then store and dispose of them under local biosafety and waste requirements. Keep tissue, reagents and used tubes out of ponds, canals and other waterways. Do not put sampled shrimp back into the pond, and do not use leftover shrimp or tissue as feed or sell them live for seed or bait.
FAQ
Should I pick healthy shrimp or weak ones?
For an illness investigation, prioritise weak, dying or sinking shrimp. For routine monitoring, follow the agreed selection rule each time. Write down when you change from one to the other.
Can I use the legs from a WSSV test to test for AHPND?
No. AHPND needs gut-associated tissue, such as hepatopancreas and stomach. Legs and gills taken for WSSV are unsuitable for AHPND.2 Follow the AHPND guide and the kit instructions.
Can I put all the shrimp into one sample?
Only if the kit instructions allow that pooling method for the disease and purpose. The number of shrimp in the table is a preparation guide. It does not specify a pool size. For load tracking, test separately unless interpretation of pooled samples has been validated.
If all the samples are negative, is my pond clear?
No. A negative result covers only the shrimp sampled and does not rule out disease in the pond or batch. If shrimp keep dying or showing signs, send samples to a laboratory. Ask the laboratory to design sampling for any formal disease-free declaration.
Do I need to test every week?
Agree the interval with your adviser. Start before stocking and plan checks at the culture stages above. If shrimp show new signs or more of them die, test straight away without waiting for the next planned check.
Should I put samples in ethanol before sending them?
Not until the laboratory tells you which preservative to use. Ethanol can be suitable for molecular tests, while histopathology may need Davidson's fixative.12 The laboratory should specify the tissue, preservative, concentration, packaging and transport for the tests it plans to run.
Sources
- WOAH (published under the OIE name, 2019). Diseases of crustaceans: General information. Manual of Diagnostic Tests for Aquatic Animals, Chapter 2.2.0. Sections 1, 7.1.6 and 7.1.8 cover specimen selection, preservation, labelling and transport. www.woah.org/fileadmin/Home/eng/Health_standards/aahm/current/chapitre_general_information_2_2.pdf
- WOAH (2023). Acute hepatopancreatic necrosis disease. Manual of Diagnostic Tests for Aquatic Animals, Chapter 2.2.1. Sections 3.1 to 3.6 cover shrimp selection, tissues, preservation and pooling. www.woah.org/fileadmin/Home/eng/Health_standards/aahm/current/2.2.01_AHPND.pdf
- Zou Y. et al. (2020). Determination of the Infectious Agent of Translucent Post-Larva Disease (TPD) in Penaeus vannamei. Pathogens 9(9), 741. doi.org/10.3390/pathogens9090741
- Chaijarasphong T. et al. (2021). The shrimp microsporidian Enterocytozoon hepatopenaei (EHP): Biology, pathology, diagnostics and control. Journal of Invertebrate Pathology 186, 107458. doi.org/10.1016/j.jip.2020.107458
- WOAH (2023). Infection with white spot syndrome virus. Manual of Diagnostic Tests for Aquatic Animals, Chapter 2.2.8. Sections 3 and 6 cover suitable tissues and suspect and confirmed cases. www.woah.org/fileadmin/Home/eng/Health_standards/aahm/current/2.2.08_WSSV.pdf
Last reviewed: